Stove/Oven Control Board
      Back to home
      1. UpFix FAQ's
      2. Appliance
      3. Stove/Oven Control Board

      Range/Oven/Stove Making a Loud Noise

      Troubleshooting and Solutions

      If your range is making a loud noise, it can be disruptive and indicate a problem with the appliance. Here are some common reasons for this issue and steps to troubleshoot and fix it.

      Common Causes:

      1. Loose or Damaged Components:

        • Loose or damaged components such as screws, panels, or burners can create noise.

      2. Faulty Fan Motor:

        • The fan motor might be defective, causing a loud noise when it operates.

      3. Burner Issues:

        • Gas burners might produce noise if they are dirty, misaligned, or faulty.

      4. Igniter Clicking:

        • Continuous clicking from the igniter can indicate a problem with the ignition system.

      5. Issues with the Control Board:

        • A malfunctioning control board might cause unusual noises.
        • UpFix repairs faulty stove/oven/range control boards, saving you up to 80%

      Troubleshooting Steps:

      1. Inspect for Loose or Damaged Components:

        • Turn off the power to the range and unplug it from the electrical outlet or turn off the circuit breaker.
        • Inspect the range for any loose or damaged screws, panels, or burners.
        • Tighten any loose screws and secure any loose panels. Replace any damaged components as necessary.

      2. Check the Fan Motor:

        • If the noise is coming from the fan, the fan motor might be defective.
        • Turn off the power to the range and unplug it.
        • Access the fan motor, usually located at the back of the oven.
        • Inspect the fan motor for any visible signs of damage or wear.
        • Use a multimeter to test the fan motor for continuity. If it is faulty, replace the fan motor.

      3. Clean and Inspect the Burners:

        • If the noise is coming from the gas burners, they might be dirty or misaligned.
        • Turn off the gas supply and power to the range.
        • Remove the burners and clean them thoroughly with a brush and soapy water.
        • Ensure the burners are properly aligned and free from obstructions.
        • If the burners are damaged, replace them.

      4. Check the Igniter:

        • If you hear continuous clicking from the igniter, it might be faulty.
        • Turn off the gas supply and power to the range.
        • Inspect the igniter for any visible signs of damage or wear.
        • Use a multimeter to test the igniter for continuity. If it is faulty, replace the igniter.

      5. Test the Control Board:

        • If the noise is coming from the control panel, the control board might be the issue.
        • Turn off the power to the range and unplug it.
        • Access the control board, usually located behind the control panel.
        • Inspect the board for any visible signs of damage or burnt components.
        • Use a multimeter to test the control board for continuity. If it is faulty, consider having it repaired or replaced.
        • UpFix repairs faulty stove/oven/range control boards.

      Replacing Faulty Components:

      1. Replacing the Fan Motor or Igniter:

        • Purchase a replacement fan motor or igniter that matches your range model.
        • Follow the manufacturer's instructions to replace the component. Typically, this involves disconnecting the old component and connecting the new one in its place.
        • Secure the new component and reassemble the range.

      2. Repairing or Replacing the Control Board:

        • If the control board is identified as the issue, consider sending it to UpFix for repair. This can save you up to 80% compared to buying a new control board.
        • Remove the faulty control board and send it to UpFix. Reinstall the repaired board once you receive it back.

      Additional Solutions:

      If you identify that the issue is related to the control board or other electronic components, consider sending your faulty control board to UpFix for repair. UpFix offers repair services that can save you up to 80% compared to buying a new component, while also supporting an eco-friendly service by reducing electronic waste.

      Safety Reminder:

      If you are unable to fix the issue yourself or if you are unsure about any steps, it’s crucial to contact a professional technician for assistance. Do not attempt to use the range until the problem has been resolved.

      For a cost-effective and eco-friendly solution, send your faulty control board to UpFix for repair and save up to 80%! Visit UpFix.com for more details.