How to Replace Range/Stove/Oven Thermal Fuse

1. Disconnect power to the oven:
   Turn off the power to the range at the main circuit breaker to ensure safety.

2. Remove control knobs:
   Detach any temperature or function control knobs from the oven.

3. Remove control panel:
   Unfasten the retaining screws to lift off the main oven control console.

4. Locate the thermal fuse:
   Identify the thermal fuse mounted on the oven's temperature control housing unit.

5. Detach wiring leads:
   Carefully unplug the electrical connections from the old thermal fuse.

6. Remove mounting hardware:
   Use a screwdriver to detach any screws or clips securing the fuse.

7. Extract the old fuse:
   Withdraw the burnt-out thermal fuse from its mounting position.

8. Install the new fuse:
   Place the replacement fuse into the vacant space on the control housing.

9. Attach mounting hardware:
   Secure the new fuse tightly with the original screws or clips.

10. Reconnect wiring:
    Plug the electrical leads back onto the terminals of the new thermal fuse.

11. Replace control console:
    Fasten the control panel back into position with the retaining screws.

By following these steps, you can effectively replace the thermal fuse in your range, ensuring safe and proper operation.

Most Common Solution

If the oven overheats, the thermal fuse acts as a safety feature that cuts off power to prevent damage. If this fuse is blown, the oven will not heat up. While this occurrence is rare, you can use a multimeter to test the continuity of the thermal fuse and determine if it needs to be replaced. Keep in mind that a blown thermal fuse cannot be reset and must be replaced if it is faulty.