Stove/Oven Control Board
      Back to home
      1. UpFix FAQ's
      2. Appliance
      3. Stove/Oven Control Board

      How to Replace Range/Stove/Oven LED Board?

      Replacing the LED board on your range, stove, or oven can restore proper display functionality and ensure you can accurately read settings and temperatures. Follow these steps to replace the LED board:

      Tools and Materials Needed:

      • Screwdrivers (Phillips and flathead)
      • Pliers
      • New or repaired LED board
      • Safety gloves

      Instructions:

      1. Safety First:

        • Unplug the appliance from the electrical outlet or turn off the circuit breaker to cut off power to the unit.
        • Allow the appliance to cool completely if it has been used recently.

      2. Access the LED Board:

        • Depending on your model, you may need to remove the back panel or the control panel cover to access the LED board.
        • Use a screwdriver to remove any screws securing the panel. Set the screws aside safely.

      3. Locate and Remove the Old LED Board:

        • Find the LED board, typically located behind the control panel.
        • Carefully disconnect any wires connected to the LED board. Note the arrangement of the wires or take a photo for reference when connecting the new board.
        • Unscrew or unclip the old LED board from its mounting and remove it from the appliance.

      4. Install the New LED Board:

        • Place the new or repaired LED board in the same position as the old one.
        • Secure it with screws or clips.
        • Reconnect the wires to the new LED board, ensuring they match the original arrangement.

      5. Reassemble the Appliance:

        • Replace the control panel cover or back panel, securing it with the screws you previously removed.
        • Ensure all connections are secure and the panels are properly aligned.

      6. Test the New LED Board:

        • Plug the appliance back into the electrical outlet or turn on the circuit breaker.
        • Test the new LED board by turning on the oven and checking if the display functions correctly.

      Troubleshooting:

      • If the LED board does not function properly, double-check the wiring connections to ensure they are secure.
      • Ensure the board is properly seated and all connections are tight.

      By following these steps, you should be able to replace the LED board on your range, stove, or oven. If you encounter any difficulties or if the issue persists, it might be a good idea to consult a professional technician.

      If the issue is identified as being related to the control board that operates the LED display, sending your faulty control board to UpFix for repair is a smart choice. This will not only save you money but also support an eco-friendly service by avoiding unnecessary electronic waste. UpFix offers repair services that can save you up to 80% compared to buying a new one. Visit our website for more information and to get started with your repair.

      For a cost-effective and eco-friendly solution, send your faulty control board to UpFix for repair and save up to 80%! Visit UpFix.com for more details.