Replacing the door handle on your range, stove, or oven is a straightforward task that can restore the functionality and appearance of your appliance. Follow these steps to replace the door handle:
Tools and Materials Needed:
- Screwdrivers (Phillips and flathead)
- Pliers (if needed)
- New door handle
- Safety gloves
- Soft cloth or towel
Instructions:
-
Safety First:
- Unplug the appliance from the electrical outlet or turn off the circuit breaker to cut off power to the unit.
- Allow the appliance to cool completely if it has been used recently.
-
Remove the Oven Door (if necessary):
- Open the oven door fully to expose the hinges.
- Locate the hinge locks on each hinge. These may need to be flipped or pulled into a locked position to release the door.
- Carefully lift and pull the door away from the oven. It may be heavy, so be sure to have a firm grip or get assistance.
-
Lay the Door on a Protected Surface:
- Place the oven door on a flat, protected surface with the handle facing up. Use a soft cloth or towel to prevent scratches.
-
Access the Door Handle Screws:
- Depending on your model, the screws securing the door handle may be located on the inner side of the door or hidden behind the inner panel.
- Use a screwdriver to remove any screws securing the inner door panel if necessary. Set the screws aside safely.
-
Remove the Old Door Handle:
- Locate the screws holding the door handle in place. These are usually accessible from the inside of the door.
- Use a screwdriver to remove the screws. Hold the handle firmly to prevent it from falling as you remove the last screw.
- Carefully remove the old door handle.
-
Install the New Door Handle:
- Align the new door handle with the screw holes on the door.
- Insert and tighten the screws to secure the new handle in place. Ensure the handle is firmly attached and aligned correctly.
- If you removed the inner door panel, reattach it and secure it with the screws you previously removed.
-
Reattach the Oven Door (if necessary):
- Carefully lift the door and align the hinges with the slots on the oven frame.
- Slide the hinges into the slots and ensure they are fully inserted.
- Release the hinge locks to secure the door in place.
- Close the door to check if it opens and closes smoothly.
Troubleshooting:
- If the door handle is loose, double-check the screws to ensure they are fully tightened.
- Ensure the door handle is properly aligned with the door and securely fastened.
By following these steps, you should be able to replace the door handle on your range, stove, or oven. If you encounter any difficulties or if the issue persists, it might be a good idea to consult a professional technician.
If the issue is identified as being related to the control board that manages door functions, sending your faulty control board to UpFix for repair is a smart choice. This will not only save you money but also support an eco-friendly service by avoiding unnecessary electronic waste. UpFix offers repair services that can save you up to 80% compared to buying a new one. Visit our website for more information and to get started with your repair.
For a cost-effective and eco-friendly solution, send your faulty control board to UpFix for repair and save up to 80%! Visit UpFix.com for more details.