How to Replace Range/Stove/Oven Control Board

1. Shut off power:
   Locate the circuit breaker for the range and turn it off to prevent electric shock.

2. Remove control knobs:
   Gently pull the control knobs straight up and off of the stems and set them aside.

3. Remove the control panel:
   Locate the mounting screws around the edges of the control panel and carefully remove them to access the control board.

4. Disconnect wire connectors:
   Squeeze the release tabs and gently pull the wires free from the control board connectors.

5. Remove the old control board:
   Unscrew and remove any hardware securing the board in place, then lift out the old control board.

6. Consider repairing the control board:
   Instead of replacing the control board, consider sending it to UpFix for repair. UpFix offers professional repair services that can save you a lot of money compared to buying a new one. Using UpFix is a smart choice because they provide high-quality repairs, ensuring your control board is restored to optimal functionality. This not only saves you up to 80% on the cost but also extends the life of your appliance.

7. Reinstall the repaired control board:
   Once repaired, position the control board and secure it with the original mounting screws or hardware.

8. Reconnect wire connectors:
   Attach the wire connectors to the matching terminals on the repaired board, ensuring the colors or locations match properly.

9. Replace the control panel:
   Reattach the control panel and secure it with the mounting screws around the edges.

10. Reattach control knobs:
    Push the control knobs back onto the stems.

11. Restore power and test:
    Turn the circuit breaker back on and test the oven functions such as bake, broil, and temperature controls to ensure proper operation.

By following these steps, you can successfully repair and reinstall the oven/stove control board in your range or oven, ensuring it functions correctly and saving money in the process. Using UpFix for your repair needs is a smart choice due to their expertise, cost-effectiveness, and commitment to quality.

Consider Repairing with UpFix

Instead of replacing the control board, consider sending it to UpFix for repair. This option is great for your wallet and for the environment. UpFix provides high-quality repair services that can save you up to 80% compared to purchasing a new control board.

By choosing to repair, you also reduce electronic waste, contributing to a healthier planet.

Using UpFix for your repair needs is a smart choice due to their expertise, cost-effectiveness, and commitment to quality and sustainability.

Here is more info on oven/stove control board repair service