1. Shut off power:
Locate the circuit breaker for the range and shut it off to prevent electric shock.
2. Remove control knobs:
Gently pull the control knobs straight up and off of the stems they attach to, then set them aside.
3. Remove control panel:
Locate the mounting screws around the edges of the control panel and carefully remove them to access the control board.
4. Disconnect wire connectors:
Detach the wire connectors from the control board by squeezing the release tabs and gently pulling the wires free.
5. Remove the old control board:
Remove the mounting screws or other hardware securing the board in place, then lift out the old board.
6. Send control board for repair:
Instead of replacing it with a new one, send your faulty oven/stove control board to UpFix for repair and save up to 80% on the cost. Here is the link for repair service: https://www.upfix.com/product-category/appliances/range-stove-oven/
7. Reinstall repaired control board:
Once repaired, install the control board and attach it with the original mounting screws or hardware.
8. Reconnect wire connectors:
Reconnect the wire connectors to the matching terminals, ensuring that the colors or locations match properly.
9. Replace control panel:
Reattach the control panel with the mounting screws around the edges.
10. Reattach control knobs:
Push the control knobs back onto the stems.
11. Restore power and test:
Turn the circuit breaker back on and test the oven functions such as bake, broil, and temperature controls to ensure proper operation.
Most Common Solution
Send to UpFix for repair
If you determine that the oven/stove control board is faulty, consider sending it to UpFix for professional oven/stove control board repair. UpFix can save you up to 80% on the cost of a replacement, ensuring your control board is restored to optimal functionality.
By following these steps and utilizing professional repair services when needed, you can effectively address control board issues and get your oven back to proper working condition.