If your loader’s fan won’t turn on, the A/C isn’t blowing cold air, or the heat only works sometimes — the problem might not be the blower motor or compressor. In many cases, it’s the HVAC control panel or cab climate control board that’s to blame.
So, do we repair them at UpFix?
✅ Yes, we do! And we specialize in restoring these critical modules to full working condition — saving you time, money, and the discomfort of working in a freezing or sweltering cab.
🧊 Common Symptoms of HVAC Panel Failure
A failing cab climate panel can make your workday miserable — especially in extreme weather. If your loader is showing any of the following symptoms, it’s time to look at the control panel:
-
🚫 No fan or blower response
-
🔥 Heat not turning on, or stuck on high
-
❄️ AC not engaging even when fully charged
-
🔁 Unresponsive or flickering temperature controls
-
⚠️ Fan stuck at one speed, or not adjustable
-
🌡️ Incorrect or fluctuating temperature output
These symptoms often lead people to replace fuses, relays, or even the blower motor — only to find out the HVAC panel itself is the real problem.
🛑 Common Error Codes / Messages:
-
HVAC ERR 02 – Mode door feedback failure
-
TEMP SENSOR ERR
-
SPN 520194 FMI 7 – Blower speed fault
-
“A/C Fault”
-
“Cab Climate Offline”
🔧 Common Symptoms:
-
Fan not blowing or only works on one speed
-
AC doesn’t engage
-
Heat not working
-
Temp control buttons unresponsive
-
HVAC backlight flickers or resets
🔍 What Causes HVAC Control Panel Issues?
Loader HVAC systems are often exposed to harsh conditions: vibration, moisture, dust, and extreme temperatures. Common causes of failure include:
-
🔥 Burned-out relays or fan control circuits
-
💧 Moisture or condensation damage inside the panel
-
⚡ Failed power transistors or MOSFETs
-
🔌 Cracked solder joints from years of vibration
-
🧯 Faulty temperature sensor logic or signal conversion issues
-
🔋 Internal short circuits or corroded PCB traces
These aren’t cosmetic problems — they directly affect the comfort and function of your machine. But they’re also 100% repairable in most cases.
🛠️ How UpFix Repairs Cab Climate Panels
When your HVAC panel arrives at UpFix, here’s what we do:
-
Perform a thorough inspection and bench test
-
Identify any burned, corroded, or damaged components
-
Replace failed relays, drivers, resistors, or temperature control chips
-
Re-solder cracked joints and clean all corroded traces
-
Perform functional testing under simulated conditions
We return your original part plug-and-play ready — fully tested and working, with no reprogramming required in most cases.
🧰 Loaders and Brands We Commonly Service
We repair HVAC and climate control panels for all types of loaders, including:
-
Compact Track Loaders & Skid Steers
-
Wheel Loaders
-
Backhoes
-
Tractor Loaders & Utility Equipment
✅ Brands include:
John Deere, Case IH, New Holland, Bobcat, Kubota, Caterpillar, AGCO, Massey Ferguson, and more.
Don’t see your loader listed? We’ve repaired hundreds of panels that aren’t on our website.
👉 Submit a Custom Repair Request
💰 Why Choose UpFix?
-
✅ Save up to 80% vs. dealership or OEM replacement
-
✅ Fast turnaround — typically 2–5 business days
-
✅ No programming needed — just plug it back in
-
✅ Expert-level diagnostics and repair
-
✅ Trusted since 2006 with over 1 million electronics repaired
📦 How to Get Started
-
Use the provided shipping label to send your panel
-
We repair and test it
-
You reinstall and get back to work — cool in summer, warm in winter
📞 Need Help or Not Sure If It’s the Panel?
Call or text our team at 888-979-9343
Or contact us online:
👉 Contact Us
💡 Stay Comfortable in the Cab — Let UpFix Restore Your HVAC Control Panel
Your comfort matters — and your loader’s climate system should work when you need it most. Don’t sweat (or freeze) it out — send your panel to UpFix and let us restore your in-cab climate control to factory performance.